Fibre is the most demanding application for additives: slightly too much and filaments break, slightly too coarse and spinnerets block, insufficient heat stability and it decomposes.
Spinneret holes are tens of microns across. If additive particles agglomerate close to that size, holes block, causing filament breaks and fuzz. This is why conventional biocide powders struggle in fibre.
We complete the dispersion during masterbatch manufacture, so what enters the melt is already dispersed at micro-nano scale.
Spinning runs hotter than moulding; PA melt spinning can reach 260–280 °C. Our antimicrobial additive has a decomposition onset above 250 °C, covering most conventional spinning windows. Hotter processes require dedicated validation.
Tenacity, elongation and hand must not shift noticeably. This has to be confirmed by trial, not by datasheet alone.
At 1.5–3.0% in PA6 and PA66, the targeted antimicrobial masterbatch brings PA fibre fabrics and nonwoven to Grade 0 mildew and fungal resistance, with no effect on spinning.
State the spinning process (melt or wet), temperature range, filament denier, and whether the product contacts food or mucous membranes. These determine grade and compliance documentation.
Tell us your resin grade, processing temperature, part thickness and the property you need to improve. We recommend a grade and dosage, ship 1–5 kg, and follow up with comparative data.
Or call Mr. Luo +86 135 5407 7117 +86 130 0101 5295