Adding nanomaterials does not make a nano-technology. The hard parts are dispersing them, nucleating in the right place, and doing it at a low enough dose. We have worked on those three for over a decade.
The term comes from medicine. A targeted drug works because it acts where the problem is, at a dose that limits side effects elsewhere.
Functional modification of polymers faces the same problem. A nucleating agent raises stiffness and heat resistance, but overdose it and the part embrittles. An impact modifier restores toughness, but too much and modulus collapses. Both have operating limits.
Targeted nano-synergy is about achieving synergy with fewer side effects. There are two layers to it: first, reduce the functional component to a micro-nano dispersion so it is distributed at very fine particle size; second, package several components in a composite carrier so they act at the right place and in the right order during crystallisation.
The result: 1.5–3% loading, strength, stiffness and toughness rising together, and processing temperature coming down.
Supporting technologies: targeted molecular lubrication, long-term anti-ageing, and functional micro-nano dispersions for in-situ colouring, antistatic and conductive effects.
There is no off-the-shelf line for industrial nano dispersion. We developed three things, and they are the reason this is not easy to copy.
Dispersing nano powders stably into a carrier is the hardest step between laboratory and production. It is what makes 10,000-tonne scale possible.
Forming the active component into microspheres controls release and distribution, avoiding local over-concentration that causes embrittlement or gels.
Packaging multiple actives in one carrier means a single addition addresses several properties, simplifying the downstream formulation step.
Granted patents: CN106422996B (supercritical CO₂ process and apparatus for functionalised nano-TiO₂ micro-nano dispersions) and CN106589715B (PVDF masterbatch loaded with functional nano-TiO₂ and its preparation).
Tell us your resin grade, processing temperature, part thickness and the property you need to improve. We recommend a grade and dosage, ship 1–5 kg, and follow up with comparative data.
Or call Mr. Luo +86 135 5407 7117 +86 130 0101 5295