This series shows the Group synergy most clearly: the HALS in the masterbatch was developed by our parent, Tiangang. Stabilisation is designed in, not bolted on.
The conventional route adds the light stabiliser and the impact modifier separately: one bag of HALS, one bag of POE, each accounted for in the formulation. The problem is that they interfere in the same melt — POE dilutes the effective HALS concentration, and the alkalinity of HALS can react with other additives.
Tinasup™ puts the stabiliser and the synergistic components into one composite carrier. They are pre-dispersed and act where designed, without fighting each other.
The result is direct: after 1200 h UVB, gloss retention is 89%, against 8% for the conventional LLDPE route.
Developed for returnable and rental pallets, a demanding combination: durable outdoors under load, cost controlled, and with residual value at end of life.
The formulation is K8003 copolymer PP plus 2% masterbatch, replacing the conventional K8003 plus 15% LLDPE. Four things improve at once:
Waste bins, outdoor toys, returnable crates and long-service moulded parts.
Tell us your resin grade, processing temperature, part thickness and the property you need to improve. We recommend a grade and dosage, ship 1–5 kg, and follow up with comparative data.
Or call Mr. Luo +86 135 5407 7117 +86 130 0101 5295