2% replaces 15% LLDPE. Higher modulus, no chalking over years outdoors, 42% shorter cycle. This is our most complete dataset.
Same batch of K8003 copolymer PP, two formulations, one test protocol. Control is the standard +15% LLDPE; trial is +2% E2625.
| Property | +15% LLDPE | +2% E2625 | Change |
|---|---|---|---|
| Flexural strength | 24.6 MPa | 34.0 MPa | +38% |
| Flexural modulus | 821 MPa | 1105 MPa | +35% |
| Gloss retention, 1200 h UVB | 8% | 89% | 11× |
| Elongation retention, 2400 h UVA | 23% | 95% | 4× |
| Notched impact retention, 2400 h UVA | 35% | 85% | 2.4× |
| Heat distortion temperature | 70 °C | 89 °C | +19 °C |
| −30 °C notched impact | 7.3 kJ/m² | 7.8 kJ/m² | +7% |
| Cycle time per pallet | 128 s | 74 s | −42% |
| Daily output | 675 | 1167 | +73% |
| Daily power consumption | baseline | −1673 kWh | −73% |
The control showed visible chalking in under two years and retained only 8% gloss at 1200 h. We report test values and retention rates; we do not convert accelerated hours into service years — that conversion varies too much with climate.
After 2400 h UVA ageing, retention determines the value of the regrind:
Control values are 23% and 35%. Recyclability is more than doubled.
TDS and full ageing report available.
Request a sample Request TDSTell us your resin grade, processing temperature, part thickness and the property you need to improve. We recommend a grade and dosage, ship 1–5 kg, and follow up with comparative data.
Or call Mr. Luo +86 135 5407 7117 +86 130 0101 5295