Home/Applications/Pallet application
02 / Pallets

Returnable pallets and logistics

The requirements are contradictory: carry the load, survive the sun, stay cheap, and remain recyclable. E2625 was designed for exactly that conflict.

One-way and returnable pallets are different problems

One-way pallets are a cost question. Returnable and rental pallets are a life-cycle question: trips per pallet, maintenance, and residual value at end of life. The formulation design starts somewhere completely different.

The conventional route is K8003 copolymer PP plus 15% LLDPE or POE for low-temperature toughness. The costs: modulus drops, load capacity falls, long-term outdoor use chalks, and regrind value at end of life is poor.

With 2% E2625

−20%
Pallet weight
−20%
Overall cost
89%
Gloss retention, 1200 h UVB
−42%
Cycle time

Why lightweighting is possible

Because modulus rises. Flexural modulus goes from 821 to 1105 MPa (+35%), so the same load can be carried with less material. That is the precondition for weight and cost both falling — if modulus stayed flat, removing weight would remove capacity.

Why it does not chalk

The masterbatch contains HALS and co-synergists developed by our parent Tiangang. After 1200 h UVB, gloss retention is 89% against 8% for the control, which showed visible chalking in under two years.

Why it is still worth something at end of life

After 2400 h UVA, the E2625 formulation retains 95% elongation and 85% impact (control: 23% and 35%). Higher retention means higher recyclability and 50% higher regrind value — which feeds straight into the asset depreciation model of a pooling operator.

Full E2625 dataset

Test it before you price it

Tell us your resin grade, processing temperature, part thickness and the property you need to improve. We recommend a grade and dosage, ship 1–5 kg, and follow up with comparative data.

Or call Mr. Luo +86 135 5407 7117 +86 130 0101 5295

Request a sample