Home/Applications/Automotive
03 / Automotive

Automotive and thin-wall

Thin-walling demands high flow, high modulus and high toughness at once. In conventional formulations these pull against each other, so most of our work here is balancing.

The three-way conflict

Thin-walling has clear motives: weight, fuel or energy consumption, and material cost. But thinner walls mean higher flow resistance (fill problems), lower stiffness (distortion), and less impact resistance (cracking).

The conventional answer is a nucleator for modulus, an elastomer for toughness and a lubricant for flow. Each works, and each cancels part of the others: elastomer reduces modulus, nucleator embrittles, excess lubricant affects plate-out and appearance.

Targeted nano-synergy controls nucleation and lubrication at molecular scale simultaneously, so the three properties move together instead of against each other.

Validated in three systems

SystemImprovement
Neat PP resinFlow clearly improved, strength and toughness both up; suitable for high-flow reactor grades
PP + POE + talcBetter filler dispersion, flexural modulus and impact both up
PP + 35% glass fibreBetter fibre wet-out, modulus and impact up, flow improved

The glass-fibre result means glass-filled PP may replace glass-filled PA6 in parts such as air intake manifolds, while interior trim and bumper compounds can be lightened.

In-reactor addition

For resin producers there is another route: add the masterbatch in-line after polymerisation to produce a high-performance grade directly, rather than have the compounder add it again downstream. This can cut overall cost significantly. Feasibility must be assessed per plant.

Validation requirements

Automotive projects usually need full material approval (OEM specifications, VOC and odour testing). We can support formulation and comparative data, but the OEM approval path has to be run with your materials department. Please put that cycle into the schedule at project start.

Test it before you price it

Tell us your resin grade, processing temperature, part thickness and the property you need to improve. We recommend a grade and dosage, ship 1–5 kg, and follow up with comparative data.

Or call Mr. Luo +86 135 5407 7117 +86 130 0101 5295

Request a sample